Optoma WHD200 Wireless HDMI Kit £229 allows you to stream Full HD video to your Optoma Projector without the need of messy cabling.
Designed for a range of Optoma Full HD 3D Projectors.
Effortlessly stream Full HD 1080p 3D content to your projector or TV wirelessly. Eliminating the hassle and extra cost of installing long cables, the WHD200 allows you to connect a Blu-ray player, digital set-top box, games console or AV receiver instantly.
For added convenience, two input devices can be simultaneously connected to the WHD200. A second display can also be connected using the included HDMI out port, which means set-up is simple for a super-sized Full HD experience.
Full HD wireless video up to 1080p/60Hz
20m maximun range (within the same room)
Easy setup with auto detection - Plug & Play
2x HDMI 1.4a 3D inputs, 1x HDMI 1.4a 3D output.
Compatible Optoma Projectors: (Home Cinema units marked in bold)
DH1011; EH501; HD50; W401; DS311; EH505; FW5200; H100; HD25e; W303; DS330; EW631; FX5200; HD25-LV; HD90; W304M; X305ST; DX330; GT1080; HD131Xe; HD26; HD27; HD91;W305ST; X307UST; EX631; HD141X; HD30; ML1500; W307UST; X401; EH300
2D Video Streaming: 1080p24, 1080p50, 1080p60 1080i50, 1080i60 720p50, 720p60, 576p, 480p
3D Video Streaming: Frame-pack: 1080p24, 720p50/60 Side-by-Side (half):1080i50/60, 720p50/60 Over-Under: 1080p24, 720p50/60
Audio Support: up to 6 Mbps AC-3 and DTS
Transmission Range: 20 meters “In Room”- depends on specific environment
System Latency: Less than 1ms
Antenna: Omni-directional High Performance Internal Antennas
Operating Frequency: 4.9~5.9GHz
Power Supply: 100~240V AC in, 5V DC out
Operating Temp: 0~40 ‘C
Accessories: Mini-USB and DC Power Adaptor, 2x HDMI(1.5m) cable, Fixing Kit, User manual, IR repeater, Remote control
Output: 1x HDMI (v1.4a 3D support)
Power: 5V DC via mini-USB
Dimensions: 95 x 95 x 34 mm
Input: 2x HDMI (v1.4a 3D support) Output: 1 x HDMI (v1.4a 3D support)
Power: 5V DC
Dimensions: 182 x 92 x 31 mm