Q Install QI65 In Ceiling Speaker (Pair) – White £149
. . . . . . save £50 off our list price . . . . .
The Q Acoustics 6.5“ Professional in-ceiling single stereo speaker features the latest stereo speaker technology that so that you can enjoy great sound with minimal installation. They give you the ability to listen to music throughout your home, even in bathrooms as they are moisture proof. Now you can listen to the same music in many rooms, where before it was practically impossible due to the impractical nature of having the speakers dotted around in each room.
Features
- Bezel and grille design that clips magnetically into place, with the grille geometry being carefully optimized to ensure the perfect balance between sound and discreet appearance
- The HF is adjustable by + or – 3dB from a switch on the crossover
- Circular and square grille options are available to ensure the perfect match for each customer’s decor.
- Only 6.5″ in diameter, they are hardly visible in your home and take up virtually no space
- Less than 84 mm deep.
- ‘UL94’ flame retardant materials
- Moisture proof
- Q Install speakers come carefully packaged with installation template and fitting instructions
Easy to install
- A cutter guide is supplied to mark out the hole you need to make
- The speakers attach to your ceiling via four clamps you screw from the front
- Speaker terminals have push open connectors that you can do with one hand
- The grilles attach via magnets
Specifications
- Tweeter: Swivel
- Tweeter diameter: 0.75″ (19mm)
- Woofer diameter: 6.5″
- Cutout Size: 203mm
- Power handling (program): 15-60W
- Impedance (nominal) ohms: 8 Ohm
- Sensitivity dB spl (2.83V, 1m): 89
- Response(Low freq.) -3dB Hz: 75
- Maximum rear depth: 79mm
- Size(Round grilles): 232mm dia
- Warranty: 5 Years
Quick and Easy Installation
Paintable grille with magnets for quick and easy installation
Large mounting clamp with non-slip tread for sure grip
Technical Specifications: QI65 Speaker : (x2)
Nominal Impedance | 8 Ohm |
Sensitivity (2.83V/m) | 89dB |
Frequency Response +/-6dB | 65Hz -28 kHz |
Crossover frequency | |
Drive Units (LF) | 160mm (6.5in) |
(MF) | – |
(HF) | 19mm (0.75in) |
Input Power | 15W – 60W |
Diameter Ø | 232mm |
Depth | 119mm |
Cut-out Diameter Ø |
203mm |
Mounting depth from surface | 79mm |